Your Trusted PVC Roof Supplier

Synthetic resin tile the reason of leakage problems and solutions company

by:Xingfa      2020-10-13
Synthetic resin tile is through the ASA, styrene and acrylate rubber compound consisting of three elements, because of its characteristics and advantages of very much, for example, qualitative light, waterproof, corrosion resistance, easy installation, etc. , especially has the characteristics of Chinese elements, and was deeply loved by consumers, so widely used. Although resin tile performance is good, but not replace the hard to avoid can travel a long time of use leakage phenomenon.


synthetic resin tile is through the ASA, styrene and acrylate rubber compound consisting of three elements, because of its characteristics and advantages of very much, for example, qualitative light, waterproof, corrosion resistance, easy installation, etc. , especially has the characteristics of Chinese elements, and was deeply loved by consumers, so widely used. Although resin tile performance is good, but not replace the hard to avoid can travel a long time of use leakage phenomenon.


today is to introduce the resin leakage problem resolution.


a, reason


1, the product quality problems


now resin tile manufacturers is less, but the product quality is uneven. With the bottom of the geometry size not standard, therefore, tile tile arc is large, relatively flat, and a warp, water will flow from horizontal base.


2, material selection,


general resin tile roof purline using logs, wood rafters with tile, tile on the shop at mixed mortar, booth cover on the surface of the resin WaWu design approach. Because wooden purline, wooden rafters are elastic material, the long-term role in roofing dead load and live load ( Wind, rain) Easy generation under the action of bending, elastic deformation is bigger, easy to cause brittle cracking of mortar, hulling and WaLong loose, resulting in leakage.


3, construction personnel technical problems


in addition, the construction personnel to the construction technology of resin are not familiar with, without waterproof processing, at the grass-roots level WaTou sealing mortar is not dense, make the tile surface rain climbed to the inside of the drip, tile roof leakage caused by resin. At the same time, the tile joint of assembled after the legal system, the skew prone to position, water leakage down from the joint.


2, synthetic resin tile leakage problem solution


1, sheathing after the installation, sheathing flat-fell seam dot hemp fiber dense with putty is to prevent slippery after installation. Due to the resin tile roof slope is compared commonly big, mechanics analysis on the decline in the overall roof force is very big, this will be between the sheathing and construction and decoration layer used prevent slippery to increase stability. And prevent slippery size depends on combination of layer thickness, and thermal insulation thickness of mud back close to commonly, spacing shoulds not be too thin can be set at 1. 3 m to 1. Between 5 m.


2, in the process of the installation of wooden sheathing, pay attention to the plank long edge direction at the edge of the plate on the roof before cutting into willow, anti-corrosion, insect-resistant, flame retardant treatment. When construction installation willow edge must be for good, to the wooden sheathing fixed to the rafters with nails, nail amount to about 50 m2, only in this way can ensure fixed solid sheathing. Is the role of willow seam roof boarding installation is close-grained, which ensures that when sheeting ashes from leaking


that is about the leakage problem is a synthetic resin tile analytical, can consult when we actually meet what describe avoid resin tile leakage. If you want to learn more about resin tile information, welcome to consult our city star building materials of synthetic resin WaChang, we will serve you wholeheartedly.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...